Gravity Separator

A series of line scan cameras image the entire width of the FlexoFolderGluer or DieCutter to collect a full size image of every fed sheet. Sheet size, rotation and print quality are assessed on each sheet and compared to either a pdf golden standard or a learned golden standard.

Eliminate customer quality problems caused by poor or defective printing on corrugated boxes. Using high speed imaging, RegChek™ captures images of each and every box going through your flexo-folder-gluer, to measure print variation in relation to the standard value set at the beginning of the order run. For specific box designs, RegChek also identifies color registration variations in relation to the board edges, as well as variations in the slot depth.

PackChek™ is an automated packaging inspection system that ensures hot melt glue has been applied in the correct locations. Hot melt sensors can be difficult to retrofit into existing machines but PackChek™ can be installed without space constraints. Using the thermal image, PackChek™ finds the heat signature of each glue bead, verifies its position and displays a user friendly image. It detects missing glue beads, faulty flaps, and weak and misaligned beads